B.Braun AESCULAP S4 Mode D'emploi page 27

4
S Spinal System
– Not applicable for the USA – See version for the USA –
WARNING
WARNING
Risk of injury due to improper mounting
of the clamping screw!
!
Set the clamping screw in place cor-
rectly.
!
Make certain that rods are correctly
positioned on the floor of the
groove.
!
Fully tighten the clamping screw,
using the torque wrench.
!
Break off the flanks only when the
clamping screws have been fully
tightened.
Correction loss due to insufficient fixa-
tion of the polyaxial head!
!
Never loosen the connection of the
polyaxial head again, once it has been
tightened.
!
Tighten the clamping screw only aft-
er every necessary correction meas-
ure has been performed.
27