Hilti VC 40 Mode D'emploi page 26

i) Check the appliance and its accessories for any
damage. Guards, safety devices and any slightly
damaged parts must be checked carefully to en-
sure that they function faultlessly and as inten-
ded. Check that moving parts function correctly
without sticking and that no parts are damaged.
All parts must be fitted correctly and fulfill all
conditions necessary for correct operation of the
en
appliance. Damaged guards, safety devices and
other parts must be repaired or replaced properly
at an authorized service center unless otherwise
indicated in the operating instructions.
Check that the filter is seated correctly. Check to
j)
ensure that the filter is undamaged.
k) Have your appliance serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the appliance is
maintained.
l) Disconnect the plug from the power source before
making any adjustments, changing accessories,
or storing the appliance. Such preventive safety
measures reduce the risk of starting the appliance
accidentally.
m) Use the appliance and its accessories etc. in ac-
cordance with these instructions and in the man-
ner intended for the particular type of appliance,
taking into account the working conditions and
the work to be performed. Use of appliances for
applications different from those intended could res-
ult in a hazardous situation.
n) Do not pull the wheels of the vacuum cleaner over
the supply cord.
o) The water level limiting device must be cleaned
regularly with a brush in accordance with instruc-
tions and checked for signs of damage.
5.5 Mechanical
a) Follow the instructions concerning care and main-
tenance.
b) Maintain the machine carefully. Check for mis-
alignment or binding of moving parts, breakage
of parts and any other condition that may affect
the machine's operation. If damaged, have the
machine repaired before use. Poor maintenance of
electric appliances is the cause of many accidents.
5.6 Electrical
a) The appliance's supply cord plug must match the
outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded)
appliances. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Insert the plug in a suitable earthed/grounded
power outlet which has been correctly and safely
installed and is in compliance with local regula-
tions.
22
All manuals and user guides at all-guides.com
c) If you are in doubt about the effectiveness of the
d) Avoid body contact with earthed or grounded
e) Do not expose appliances to rain or wet condi-
f)
g) Check the condition of the appliance and its ac-
h) Do not touch the supply cord or extension cord if
i)
j)
k) Have the appliance repaired only by a trained elec-
l)
m) When operating an electric appliance outdoors,
n) In case of an interruption in the electric supply:
o) Avoid using extension cords with multiple power
p) Use the electric tool power outlet only for the
q) Never spray the top section of the vacuum cleaner
r)
s)
t)
power outlet's earth/ground connection, have it
checked by a qualified specialist.
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
tions. Water entering an appliance will increase the
risk of electric shock.
Check the appliance's supply cord at regular in-
tervals and have it replaced at a Hilti service
center if damage is found. Check extension cords
at regular intervals and replace them if damage is
found.
cessories. Do not operate the appliance and its
accessories if damage is found, if the appliance is
incomplete or if its controls cannot be operated
faultlessly.
they are damaged while working. Disconnect the
supply cord plug from the power outlet. Damaged
supply cords or extension cords present a risk of
electric shock.
The electric supply cord may be replaced only
with a cord of the type specified in the operating
instructions.
Damaged or faulty switches must be replaced at
a Hilti service center. Do not use the appliance if
it cannot be switched on and/or off correctly.
trical specialist (Hilti service center) using genuine
Hilti spare parts. Failure to observe this point may
result in risk of accident to the user.
Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the appliance. Keep
the cord away from heat, oil, sharp edges or mov-
ing parts. Damaged or entangled cords increase the
risk of electric shock.
use only extension cords of a type suitable for
outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
Switch the appliance off and unplug the supply
cord.
outlets and the simultaneous use of several ap-
pliances connected to one extension cord.
purposes described in the operating instructions.
with water: this presents an electrical hazard and
may damage the appliance.
Connectors on mains power cables, extension
cords or supply cords must provide protection
from sprayed water.
Grip the plug when unplugging the supply cord
(do not pull or tug at the supply cord).
Never pull the vacuum cleaner by the supply cord
to a new working position.