Battery And Power Adapter Operation; Battery Operation - Sygonix 35469R1 Notice D'emploi

Caméra de surveillance ir, 720p
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Press the M button when you have finished making all the settings.
• Set the TEST OFF CAM PSET switch (19) to OFF to turn off the camera.

10. Battery and power adapter operation

Warning
Do not use batteries with a different voltage rating than specified in this manual. Use
of batteries with other specifications will result in damage to the camera and the
warranty will be void.
Warning
Always turn off the camera before removing or inserting batteries. Removal of
batteries during operation can damage the camera.
The camera is designed to run with two different voltage types. It can be operated with batteries
or an AC adapter. Neither batteries nor an AC adapter are included in delivery and must be
provided by the user.
a) Battery operation
• Make sure that the camera is switched off. The TEST OFF CAM PSET switch must be in
the OFF position.
• The product operates on 4 type C 1.5 V batteries. It is recommended that you use only
high-quality batteries.
• To open the battery compartment cover (1), turn from the CLOSE marking to OPEN and lift
it off the device.
• Insert 4 type C 1.5 V batteries into the battery compartment (11). When inserting the batteries,
observe correct polarity (+/-) as indicated next to the battery compartment.
• Replace the battery compartment cover with the marker point at the OPEN marking.
Press down the battery compartment cover and turn it to the CLOSE position. The battery
compartment cover is closed.
43

Publicité

Table des Matières
loading

Table des Matières