Mains Operation With An External Ac Adapter; Sd Card - Sygonix 35469R1 Notice D'emploi

b) Mains operation with an external AC adapter
The product features a 12 V/DC connection jack and thus enables operation with an external AC
adapter (not included in delivery). A connector with the following dimensions is required for AC
adapter jack: Outer Ø 5.5 mm / inner Ø 2.1 mm.
Battery operation is deactivated during AC adapter operation to prevent batteries from being
drained. The batteries need not be taken out of the device for normal operation.
But the batteries must be removed from the device if the PRE-TAKE feature is active.
Connect a suitable AC adapter as follows:
• Make sure that the camera is switched off. The TEST OFF CAM PSET switch must be in
the OFF position.
• Open the cover (13) for the DC 12V connection jack (20). Connect the connector plug on your
AC adapter to the DC 12V jack. Observe correct polarity as indicated next to the AC adapter
jack when connecting an AC adapter.
• After disconnecting the AC adapter, close the DC 12V jack cover to prevent water from
entering the device.

11. SD card

Warning
Always turn off the camera before removing or inserting an SD card. Removal of an
SD card during operation can damage the camera.
If the SD card is full after recording, the camera will stop and the LC display shows
"FULL".
The SD card slot accepts Class 6 SD cards and lower (backward compatible to Class 2) with up
to 32 GB. An SD card is not included in delivery. The LC display shows the number of images
saved on the SD card. If there is no SD card in the slot, the LC display shows "NOSd" (no SD).
Recording without an SD card is not possible as the camera does not feature internal memory.
44