Blackmagic Design HyperDeck Disk Recorders Mode D'emploi page 40

7
YouTube will now generate a stream key that will
direct Open Broadcaster to your YouTube account.
Click the 'copy' button next to the stream key.
Copy the stream key that you will now paste
into Open Broadcaster.
9
To connect Open Broadcaster's broadcast
link to YouTube, click 'start streaming' in the bottom
right corner of the screen. This establishes the link
to YouTube from Open Broadcaster and from here
everything will now be set using YouTube Live.
11
With Open Broadcaster now communicating
with YouTube Live, you are ready to begin your
broadcast. Now it's time to perform your final
checks and make sure everything is good.
You are now broadcasting live on YouTube with Open Broadcaster.
NOTE Due to the nature of internet streaming there can often be a delay, so it's
important to watch the stream on YouTube and confirm your program has finished
before clicking 'end stream' to make sure you don't accidentally cut the end of your
broadcast short.
8
Return to Open Broadcaster and open the
preferences by clicking on 'OBS/preferences'
in the menu bar. Select 'stream'. Now paste in the
stream key you copied from YouTube and click 'OK'.
You will now see the video from your HyperDeck
in the Open Broadcaster streaming preview window.
10
Go back to YouTube Live and you will see the
webcam program output from your HyperDeck
in the background. Click 'done'.
12
If you are all set, you can now begin
your broadcast by clicking 'go live'.
Using your HyperDeck as a Webcam 40