Blackmagic Design HyperDeck Disk Recorders Mode D'emploi page 409

开发人员信息
Blackmagic HyperDeck
Blackmagic HyperDeck Ethernet Protocol
TCP
接口， 连接该型号的 端口
备和我们的产品进行整合。
Protocol Commands
Command
help or ?
commands
device info
disk list
disk list: slot id: {n}
quit
ping
preview: enable: {true/false}
play
play: speed: {-5000 to 5000}
play: loop: {true/false}
play: single clip: {true/false}
playrange
playrange set: clip id: {n}
playrange set: clip id: {n} count: {m}
playrange set: in: {inT} out: {outT}
playrange set: timeline in: {in} timeline out:
{out}
playrange clear
play on startup
play on startup: enable: {true/false}
play on startup: single clip: {true/false}
play option
play option: stop mode:
{lastframe/nextframe/black}
record
record: name: {name}
record spill
Ethernet
是一项基于文本的协议，
9993
即可使用这一协议。 如果您是软件开发人员， 可使用这一协议将各类设
Blackmagic Design
对广大用户公开各类协议， 并期待您的创意！
Command Description
Provides help text on all commands and parameters
return commands in XML format
return device information
query clip list on active disk
query clip list on disk in slot {n}
disconnect ethernet control
check device is responding
switch to preview or output
play from current timecode
play at specific speed
play in loops or stop-at-end
play current clip or all clips
query playrange setting
set play range to play clip {n} only
set play range to {m} clips starting from clip {n}
set play range to play between:
- timecode {inT} and timecode {outT}
set play range in units of frames between:
- timeline position {in} and position {out} clear/reset play
range setting
clear/reset play range setting
query unit play on startup state
enable or disable play on startup
play single clip or all clips on startup
query play options
set output frame when playback stops
record from current input
record named clip
spill current recording to next slot
Protocol
以太网协议
HyperDeck Studio
自带以太网
开发人员信息 409