Blackmagic Design HyperDeck Disk Recorders Mode D'emploi page 480

Developer Information
Blackmagic HyperDeck
Blackmagic HyperDeck
이더넷 프로토콜은 이더넷 연결이 내장된
9993
포트 에 연결하여 액세스하는 텍스트 기반 프로토콜입니다. 소프트웨어 개발자들은 프로토콜을
Blackmagic Design
사용하여 장비들을
자사의 프로토콜을 공개하여 고객들이 새로운 방안을 고안해 낼 수 있기를 기대하고 있습니다!
프로토콜 명령어
Command
help or ?
commands
device info
disk list
disk list: slot id: {n}
quit
ping
preview: enable: {true/false}
play
play: speed: {-5000 to 5000}
play: loop: {true/false}
play: single clip: {true/false}
playrange
playrange set: clip id: {n}
playrange set: clip id: {n} count: {m}
playrange set: in: {inT} out: {outT}
playrange set: timeline in: {in} timeline out:
{out}
playrange clear
play on startup
play on startup: enable: {true/false}
play on startup: single clip: {true/false}
play option
play option: stop mode:
{lastframe/nextframe/black}
record
record: name: {name}
record spill
이더넷 프로토콜
HyperDeck Studio
제품과 통합시킬 수 있습니다. 저희
Command Description
Provides help text on all commands and parameters
return commands in XML format
return device information
query clip list on active disk
query clip list on disk in slot {n}
disconnect ethernet control
check device is responding
switch to preview or output
play from current timecode
play at specific speed
play in loops or stop-at-end
play current clip or all clips
query playrange setting
set play range to play clip {n} only
set play range to {m} clips starting from clip {n}
set play range to play between:
- timecode {inT} and timecode {outT}
set play range in units of frames between:
- timeline position {in} and position {out} clear/reset play
range setting
clear/reset play range setting
query unit play on startup state
enable or disable play on startup
play single clip or all clips on startup
query play options
set output frame when playback stops
record from current input
record named clip
spill current recording to next slot
TCP
모델에서
Blackmagic Design
은
Developer Information
480