CAMPAGNOLA STARK 90 Manuel D'utilisation Et D'entretien page 34

1. The blades are not closed.
2. Completely unscrew the extension pole fixing
ring nut.
3. Rotate the extension pole clockwise.
4. The blades are too closed.
5. Completely unscrew the extension pole fixing
ring nut.
6. Rotate the extension pole counterclockwise.
7.
The closure of the blades is compliant
WARNING!
During use, if the fixing ring of the extension pole (/) is loose, stop working immediately. Keep the trigger (4)
pressed to close the blade, and then tighten the extension pole locking ring (14).
Replacing the extension pole
To replace the extension pole, carry out the following operations:
1. Completely unscrew the extension pole fixing ring nut.
2. Rotate the extension pole counterclockwise until the tie rod is completely removed.
3. Remove the whole unit attached to the extension pole.
4. Fit the new extension pole assembly by turning clockwise until it locks.
5. Fully screw the extension pole fixing ring nut.
Special maintenance
WARNING!
Any special maintenance operation, such as the replacement of the gear motor or of the main boards, must be
carried out at an Authorized Service Point.
AUTHORIZED SERVICE POINT
It is the Service Point authorized by the Manufacturer for repairing the products.
Pag. 34
.
Use and maintenance manual – Translation of
original Instruction.: 00, Date 07/06/2021