CAMPAGNOLA STARK 90 Manuel D'utilisation Et D'entretien page 26

DIRECTIVE 2012/19 / EU APPLIES ONLY TO ELECTRICAL AND ELECTRONIC
TOOLS AND / OR EQUIPMENT.
EVEN IF THE CE PLATE / LABEL SHOWS THE SYMBOL OF THE
BARRED WASTE CONTAINER ON WHEELS, THIS DIRECTIVE DOES NOT APPLY
TO PNEUMATIC PRODUCTS
Product description
The product has been designed for cutting or pruning branches with a maximum diameter of 38 mm, depending on the
wood type, in orchards, vineyards, etc.
It is powered by a plug-in battery and consists of a handle, which is integral with the extension pole that supports the
blade group. The movement of the mobile blade is carried out by means of a tie rod which is operated by a gearmotor
equipped with a recirculating ball screw. The extension pole with different lengths on the three products allows the
operator to reach high branches.
Easy to use, it has a performance being 8/10 times superior to the one of the hand shears.
The pruning quality turns out to be much better than when the operation is carried out manually.
WARNING!
The tool has been designed and manufactured exclusively for the purposes mentioned above.
Parts supplied
- Electric shear mounted on extension pole
- 2 Lithium batteries
- Battery charger
- Quick guide
- Tool set
Intended use
The tool has been designed for cutting and pruning according to the above-described manners and limits.
Any different use is not allowed. Examples of different use is cutting objects made of metallic or rubber materials, fabrics,
synthetics, meat or food, stones, pieces of cement, glass or glass compounds, carbon fibre.
WARNING!
• Any other use must be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.
Tool composition
Pos. Denomination
1
Blade
2
Anvil
3
Blade pin
4
Trigger
5
ON/OFF button
6
LED light indicator
7
Extension pole
8
Battery protection
9
Battery
10
Release plates
11
Battery charger
12
LED light indicator
13
Recharge connectors
14
Locking ring
Pag. 26
Function
Is the cutting blade
Holds back the branch
The cutting blade rotates on it
Operates the tool
Switches the tool on and off
Shows when the tool is powered
Holds the blade group
Protects the battery from shocks
Allows to operate the tool
Allow to insert the battery into the tool or to remove it
Charges the battery
Shows the battery charge status
Connect the battery charger to the battery
Locks the extension pole on the handle
Use and maintenance manual – Translation of
original Instruction.: 00, Date 07/06/2021