8
Maintenance
8.1
Care and maintenance
Interval
Work
Before each
–
Check the anchorage of the hoist
working day
–
Inspect the wire rope for clinging dirt (see § 8.3)
–
Functional tests (see § 6.3)
–
Check the power supply cable of the hoist
–
Check the hoist's connection cable to the control box
Every 50 running
–
Traction sheave external teeth (only model series X 2050), see
hours
page 52
1 x annually
–
Annual safety inspection and maintenance of the hoist
250
/ 500
Running
1
2
–
General overhaul of the hoist
hours / after 10
years
3
Whenever
See page 50:
necessary
–
Clean the wire rope
–
Lubricate the wire rope
–
Replace the wire rope
–
Clean the rope reel and rope guide
–
Clean the limit switch and the activator
–
Lubricate the limit switch activator
–
Grease the axle for the hand crank
–
Replace the cable
8.2
Trained and certified maintenance personnel
Risk of falling! Risk of injury by falling objects!
Danger of death due to incorrectly carried out maintenance or service work!
Maintenance and service work which requires the product to be opened may only be performed by the following authorized
parties:
–
The TRACTEL Greifzug GmbH
–
Lifting equipment service companies authorized by TRACTEL Greifzug GmbH
–
Service personnel trained and certified by TRACTEL Greifzug GmbH
8.3
Mandatory records of all maintenance work
A written certificate is required for the annual safety inspection and any exceptional tests. The inspections must be recorded in a
logbook (optional scope of delivery).
Devices with 50 Hz and with rope speed of 12 m/min or more
1
2
Devices with 50 Hz and with rope speed of 9 m/min or less
3
Depending upon which occurs first
G1035.4 – 01/2019
DANGER!
Installation and operating manual
Implementation
Operating personnel
Operating personnel
Trained and certified maintenance personnel
Tractel or a hoisting gear workshop that has been
approved by Tractel
Trained person nominated by the operator
Electrician
EN-49