Disposal Of The Machine And Its Parts; Disposing Pneumatic Springs; Spare Parts: General Warnings; The Manufacturer - Berkel BV 400/25 Mode D'emploi

Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62

9. dISPoSal of THE MaCHINE aNd ITS ParTS

for scrapping the vaCuuM PaCkagINg MaCHINE or its parts, do not dump these in city
waste bins: scrapped appliances are not useless wastes!
The machine does not contain components that are hazardous for humans or the environment; it is made of
materials that can be recycled completely or disposed off normally.
for scrapping operations, contact specialist, authorized Companies.
Before starting dismantling operations, make sure there is enough clearance around the
machine to carry out the operations easily
In any case, make sure, every part of the machine is disposed off in accordance with the legislation applicable
in the country of use.

9.1 dISPoSINg PNEuMaTIC SPrINgS

daNgEr!
Danger of serious injury: the pneumatic springs are loaded at about 180 bar, therefore they
must not be cut or damaged as they can burst throwing off splinters.
The disposal of these parts must be done exclusively by qualified personnel.
For ordering spare parts, always indicate the following data:
• MACHINE SERIAL NUMBER (see DATA plate on the back of the machine).
Thank you for your trust.
The manufacturer reserves the right to make technical and/or aesthetic modifications to our products at any
moment, without any prior notice.
38

10. SParE ParTS: gENEral warNINgS

11. THE MaNufaCTurEr