Installation; Appliance Description - Berkel BV 400/25 Mode D'emploi

5.1 aPPlIaNCE dESCrIPTIoN

This vacuum packaging machines are meant for packing dry and/or cured products, thanks to the operating This vacuum packaging machines are meant for packing dry and/or cured products, thanks to the operating
principle based on creation of vacuum inside a chamber (or tray), inside which the product in a special bag or principle based on creation of vacuum inside a chamber (or tray), inside which the product in a special bag or
rigid container is placed. rigid container is placed.
As explained in detail in the "USING THE APPLIANCE" Chapter, some models can be used for creating a va- As explained in detail in the "USING THE APPLIANCE" Chapter, some models can be used for creating a va-
cuum in special "channelled" bags outside the vacuum chamber, thereby making it possible to pack products cuum in special "channelled" bags outside the vacuum chamber, thereby making it possible to pack products
larger than the vacuum chamber dimensions. larger than the vacuum chamber dimensions.
The work cycles (vacuum, bag sealing, devacumation and opening the cover) are carried out automatically in The work cycles (vacuum, bag sealing, devacumation and opening the cover) are carried out automatically in
sequence. The functions can be programmed for up to a maximum of 10 programs. sequence. The functions can be programmed for up to a maximum of 10 programs.
The machines basically consist of the following parts:
• A stainless steel chamber (vacuum chamber) • A stainless steel chamber (vacuum chamber)
means of sealing bars means of sealing bars
which the operating phases can be observed. The depth inside the chamber may be changed using plastic which the operating phases can be observed. The depth inside the chamber may be changed using plastic
insertion plates insertion plates supplied with the machine; supplied with the machine;
d
• Stainless steel casing • Stainless steel casing
casing is closed by a stainless steel panel. casing is closed by a stainless steel panel.
• A high-performance vacuum pump lubricated in recirculation with glass window • A high-performance vacuum pump lubricated in recirculation with glass window
An air evacuation system consisting of unions, pipes and solenoid valves, connects the vacuum chamber to An air evacuation system consisting of unions, pipes and solenoid valves, connects the vacuum chamber to
the pump and the system adjustment and/or control organs. the pump and the system adjustment and/or control organs.
• An electrical system which includes the power board with fusebox, control and connections board. All the • An electrical system which includes the power board with fusebox, control and connections board. All the
functions are controlled by a microprocessor. functions are controlled by a microprocessor.
C C
d d
a a
B B
Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62

5. INSTallaTIoN

B B
; it is fitted with a transparent plexiglas cover ; it is fitted with a transparent plexiglas cover
, with the control panel and main power switch located on the front. The rear of the , with the control panel and main power switch located on the front. The rear of the
E
E E
E E
Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60
inside which vacuum is created and bags are sealed by inside which vacuum is created and bags are sealed by
a
f f
that can be opened, and through that can be opened, and through
C
for checking the oil level. for checking the oil level.
f
a a
d d
B B
f f
C C
15 15