Replacing Fuses - Berkel BV 400/25 Mode D'emploi

7.3.10 rEPlaCINg fuSES

warNINg!
This operation must be carried out by qualified personnel.
• Disconnect the plug from the mains socket.
• Remove the rear panel and remove the fusebox capsule by rotating it anticlockwise through half a turn and
replace the burnt fuse with a new fuse having identical features (See Technical Data Table).
• aTTeNTION: In three-phase models, the ceramic fuse PF5 is not fixed on the power board but is po-
sitioned on the side of the remote control switches inside the electric panel.
Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62
PF1
PF2
PF5
PF4
PF4
PF1
PF2
35