Table des Matières
Publicité
Securing your child into the child restraint
6. To adjust the shoulder strap level,
6
from bottom to top, pull the ring located on
top of headrest until the panel is disengaged
and able to move. Once the desired position is
reached, make sure that the panel is properly
latched.
To adjust the shoulder strap level from top to
bottom pull the ring with one hand and push
the panel down with the other hand at the
same time. Check that the panel is properly
latched.
Note: The lower 7 head panel positions can
be used in the rear facing mode. Positions 8,
7
9 and 10 should only be used in the forward
facing mode.
Check maximum rear facing head panel
height behind the seat (detail in picture 6).
7. Insert both latch plates into the buckle
click
until you hear them click. Pull on the straps
to make sure that both plates are latched
securely.
- 51 -
Publicité
Table des Matières
