Securing Your Child Into The Child Restraint; Harness Use And Adjustment - Peg-Perego Primo Viaggio Convertible Kinetic Mode D'emploi

Securing your child into the child restraint

HARNESS USE AND ADJUSTMENT

1. This child restraint uses a 5 point harness
system to secure your child. Before placing
your child in the seat, push the release button
(A) and pull the shoulder straps (B) as shown
in the picture.
2. Open the buckle by pushing on the
red button (C) and pulling the latch plates up
(D) as shown in the picture.
Open the chest clip following the procedure
shown in the picture (A and B).
3. Insert the buckle tongues into the side
bands and pull the crotch portion of the
harness assembly in forward position, to
make room for your child. Make sure that the
seating area is free of any harness or other
objects.
1
B
B
A
- 49 -
2
B
A
D
C
3