Peg-Perego Primo Viaggio Convertible Kinetic Mode D'emploi page 36

Installing your child restraint in the vehicle - Rear Facing mode
IMPORTANT: check inside the shell openings;
verify that the waist portion of the belt is
placed as shown in the picture.
4. Buckle the vehicle belt and check under the
4 5
seat that the adjuster strap is not entangled
with the vehicle seat belt.
5. Push the child restraint firmly into the
vehicle seat and pull the vehicle belt in order
A
to eliminate any slack. Follow the procedure C
shown in the picture making sure that while
the child restraint is pushed down (A), the lap
portion of the belt is pulled from the fixed
click
B
point toward the buckle (B). Then pull the
diagonal portion of the belt upwards (C).
- 36 -