Installing your child restraint in the vehicle
Lap belt (2-point) with Switchable Locking
Retractor (ELR --> ALR). This type of seat
belt has a latch plate that is sewn to the end
of the belt. To activate ALR retractor for child
seats installation, some vehicle models may
require to pull the belt all the way through;
some other vehicle models may require
to pull the belt for a certain length (check
vehicle owner's manual for details). Tighten
the belt around the seat feeding the belt
back into the retractor. The belt will not
extend unless you unbuckle the belt and
repeat the operation from the beginning.
Lap belt (2-point) with Emergency Locking
Retractor (ELR). This type of seat belt has a
latch plate sewn at the end of the belt; it will
only lock in an emergency (sudden stop or
crash).
Important note: DO NOT USE Primo Viaggio
Convertible Kinetic with this belt.
If additional help is needed call Customer
Service @ 1-800-661-5050.
ELR -->ALR
- 22 -
5/6