CAUTION!
Never use solvents, particularly alcohol, acetone, petrol and diesel, on the surface of the labels when cleaning the rim:
these types of labels are extremely resistant to atmospheric agents but they are susceptible to solvents and they cannot be replaced.
Use only mild cleaning substances such as water and neutral soap, or specific products for cleaning bicycles, to clean the wheels. Dry
using a soft cloth and never use abrasive or metallic sponges.
NOTE
Never spray your bicycle with water under pressure.
Pressurized water, even from the nozzle of a small garden hose, can pass seals and enter into your Campagnolo
repair. Wash your bicycle and Campagnolo
WARNING!
Salt water environments (as found on winter roads and near the seaside) can cause galvanic corrosion on most bike parts. Carefully rinse, clean, dry and
re-lubricate all exposed parts to avoid damage, malfunctions and accidents.
When transporting the wheel separately from the bike or if the wheel will not be used for a long period of time, store it in the wheelbag to protect it
against impacts and dirt.
12
6.1 - CLEANING THE WHEELS
components by wiping them down with water and neutral soap.
®
6.2 - TRANSPORT AND STORAGE
Campagnolo S.r.l. reserves to modify the content of this manual without notice.
The updated version will always be available www.campagnolo.com.
components, damaging them beyond
®
REV00 - 11/2017