CAMPAGNOLO BORA ULTRA TT Manuel Pour L'utilisateur page 24

• Campagnolo hub bearings are in Cronitect
to lubricate the hub bearings, ball bearings, and FW gear with specific oil for bearings.
• Keep the braking surface of the rim and the brake pads free from oil and grease.
• At the end of lubrication operations CAREFULLY degrease the braking surface and the brake shoes.
• To maintain the brake pads are in efficient working order and to avoid wear on the sides of the rims, you should remove with a file any residue of sand,
debris or foreign objects which may become embedded in the brake pads, especially during use in the rain.
• When riding in wet conditions, remember that the stopping power of your brakes is greatly reduced and the adherence of the tires to the ground is
considerably reduced. This makes it harder to control and stop your bicycle. Extra care is required when riding your bicycle in wet conditions to avoid an
accident. An accident could result in severe personal injury or death.
• Periodically check the state of wear of the brake blocks and replace them when the braking surface approaches the end of the groove marked "WEAR LIMIT",
or in the case of inadequate braking performance.
IMPORTANT! Insert the new block, ensuring that the wheel forward arrow on the block is in the actual direction that the wheel spins.
Identify the block with the "LEFT" indication to install it on the LEFT HAND brake block holder and the block with the "RIGHT" indication to
install it on the RIGHT HAND brake block holder.
• Never make any modifications whatsoever to any component of any Campagnolo product.
• Parts which have been bent or otherwise damaged in an accident or as a result of any other impact must not be re-straightened. They must be replaced
immediately with original Campagnolo parts.
• After using the wheel for the first time, check wheel trueness and circularity.
WARNING!
Using wheels that have not been centred properly or which have broken or damaged spokes may result in accidents, personal injury or death.
• Do not expose the carbon wheels to high temperatures. Do not store bike parts in vehicles parked in the sun, and do not store near radiators or other heat
sources. Do not store carbon fiber products in direct sunlight.
(advanced solution by FAG) and the balls are ceramic. Periodically bring the bike to a specialized mechanic
®
11