CAMPAGNOLO BORA ULTRA TT Manuel Pour L'utilisateur page 19

See the "Quick Release" instruction sheet.
4.1 - 9S / 10S SPROCKETS OF CAMPAGNOLO S.R.L. (ON FW BODY FOR 9S / 10S SPROCKETS OF CAMPAGNOLO S.R.L.)
Refer to the instruction leaflet enclosed with the sprockets for all the assembly, disassembly, use and maintenance operations.
4.2 - 11s SPROCKETS of Campagnolo s.r.l. (on FW body for 11s sprockets of Campagnolo s.r.l.)
1) The sprockets are pre-assembled and timed
on the plastic support (A - Fig. 2). The ring G (Fig.
2) is provided with a preassembled washer (H);
ensure that it is positioned as in fig. 2.
2) Remove the ring (G - Fig. 2).
3) Insert the support on the side of the freewheel
body, align the spline patterns, press the spro-
ckets onto the freewheel and extract the support
(A) from the hub (Fig. 2).
6
3 - FITTING THE WHEEL ON THE FRAME / USING THE QUICK RELEASE
4 - SPROCKET ASSEMBLY AND REMOVAL
2
4.2.1 - ASSEMBLY
A
A
G
G
H