4.3 - 9S, 10S, 11S SPROCKETS FROM SHIMANO INC. and SPROCKETS FROM SRAM CORPORATION
(on the Campagnolo freewheel body for Shimano Inc. 9/10/11s sprockets and Sram Co. sprockets)
IMPORTANT!
WITH THE 11S FREEWHEEL BODY, ONLY USE THE ADAPTER (M - FIG.7) FOR 9S AND 10S
SPROCKET PACKS BY SHIMANO INC. AND SRAM CO. (THE ADAPTER MUST NOT BE USED
FOR 11S SPROCKET PACKS BY SHIMANO INC.).
The adapter (M - Fig.7) must be fitted on the freewheel body of the 9s or 10s sprocket pack, or on
any washer supplied together with the 9s or 10s sprocket pack.
See the instruction sheet provided by the sprocket pack manufacturer for installation, removal
and maintenance instructions.
Please consult the instruction sheet supplied by the manufacturer.
• When riding in wet conditions, remember that the stopping power of your brakes is greatly reduced and the adherence of the tires to the ground is consi-
derably reduced. This makes it harder to control and stop your bicycle. Extra care is required when riding your bicycle in wet conditions to avoid an accident.
An accident could result in severe personal injury or death.
WARNING!
While operating the brake lever, check the two brake pads GET into contact with the rim surface AT THE SAME TIME. If this is not the case, check the
brakes are correctly centred.
8
5 - BRAKES
7
M