Plc Address Assignment - Aventics PROFIBUS DP Mode D'emploi

Fig. 14: WinDP editor menu, assigning PLC addresses for 24 valve solenoids
AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE

7.2.5 PLC address assignment

1. Access the dialog window of the WinDP editor.
The I/O window of WinDP lists
W
all inputs E (I),
W
all outputs A (O),
W
all additional inputs EZ (AI) and
W
all additional outputs AZ (AO) as well as
W
special channels.
The selection of the PLC address space in the presettings is
taken into account here. If symbol files are activated there, the
symbols and symbol comments for the respective inputs and
outputs are displayed.
2. Select field A for outputs and then click on a free PLC output
it in the E/A window.
3. By holding down the left mouse button, the output can be
dragged and dropped on a valve terminal output byte in the
work area.
Commissioning and Operation
117