Aventics PROFIBUS DP Mode D'emploi page 122

122 AVENTICS | PROFIBUS DP | R499050016–BDL–001–AE
Commissioning and Operation
Remedying errors
Fig. 17: Module data window, example: 24 valve solenoids
By deleting the module with the configuration data 0x00, the
error is eliminated.
1. To do this, click in the work area on the module to be deleted
and press the "Entfernen" (delete) key.
2. Load the correct master parameter set in the bus master.
After the correct master parameter set is loaded into the bus
master, the diagnosis should display an error-free PROFIBUS
DP similar to the following example.