Setting The Aspiration And Discharging Speed - StarLab ErgoOne E Mode D'emploi

SETTING THE ASPIRATION AND DISCHARGING SPEED

The aspiration and discharging speeds can be individually adjusted. When the menu is called up, the
last speed setting is shown. Five speed levels are available.
What to do
Setting the aspiration speed
1.
Bring up the menu
2.
Change the
aspiration speed
3.
Confirm speed
level
Setting the discharging speed
1.
Bring up the menu
2.
Change the
discharging speed
3.
Confirm speed
level
How to do it
Press the MENU key once
to bring up the aspira-
tion speed menu. 'Speed'
blinks.
Press either the UP or
DOWN key to select the
desired speed (in this case,
level 5).
'Speed' continues to blink.
Press the ENTER key. The
display returns to the start
position for the current pi-
petting mode (in this case,
the standard PIP mode).
Press the MENU key twice
to bring up the discharg-
ing speed menu. 'Speed'
blinks.
Press either the UP or
DOWN key to select the
desired speed (in this case,
level 2).
'Speed' continues to blink.
Press the ENTER key. The
display returns to the start
position for the current
pipetting mode (in this case,
the standard PIP mode).
Keys to press Display readout
1x
+
–
1x
2x
+
–
1x
ErgoOne E · User Manual · 9