Setting The Volume - StarLab Ergo One Mode D'emploi

2.2 Setting the Volume

Open the volume adjustment catch by
pulling up the volume control button
(Fig. 1), until you hear a click. Turn
1
the volume control button
to reduce the aspirated volume, or
counter clockwise to increase it. The
set volume is shown in the four-step
volume display
with a white line indicating the decimal
point. When you have finished setting
the volume, push the volume control
button back to its lock position until
1
you hear a click. The pipette is now
ready to use.
Please note the minimum
and maximum volume
range of your pipette (Ta-
ble 1). You have reached
the end point of the vol-
ume adjustment when it
becomes more difficult to
turn the button and you
can hear a clicking sound.
Do not use excessive force!
Examples of typical volume displays:
10µl Pipette
10.00µl
4
· ErgoOne · User Manual
clockwise
1
from top to bottom,
4
ErgoOne
2.5µl
10µl
20µl (micro cone)
20µl (standard cone)
100µl
200µl
300µl
1000µl
5000µl
Table 1
0.50µl 200.0µl
Fig. 1
Volume range ErgoOne
model Volume range (min./ max.)
®
200µl Pipette
20.0µl
®
0.1 – 2.5µl
0.5 – 10µl
2 – 20µl
2 – 20µl
10 – 100µl
20 – 200µl
30 – 300µl
100 – 1000µl
500 – 5000µl
1000µl Pipette
1000µl
Colour code
Red
Red
Red
Yellow
Yellow
Yellow
Green
Blue
Violet
100µl