StarLab ErgoOne E Mode D'emploi page 13

PIP MODE
What to do
6.
Discharge liquid
7.
Start blow-out?
START BLOW-OUT MANUALLY
The blow-out function can, if necessary, be initiated manually
at any time.
1.
Bring up the
blow-out function
2.
Start blow-out
NOTE:
To accomplish the blow-out, the piston moves to its lowest position.
The user must be certain that any residual liquid is discharged safely.
If the pipetting key is pressed and held, the piston will be maintained
at its lowest position to avert an accidental aspiration of liquid.
When the key is released, the piston returns to the start position
How to do it
Press the pipetting key
once to discharge the
liquid. The arrow in the
display points downwards
(discharge).
No action required!
When pipetting in the PIP
mode the blow-out func-
tion is performed auto-
matically.
Press the ENTER key. The
display shows 'blo'
for blow-out.
Press the pipetting key
once to initiate the blow-
out process. The display
moves back to the start
position of the selected
pipetting mode.
Keys to press Display readout
1x
1x
1x
ErgoOne E · User Manual · 13