Topdon AL500B Manuel De L'utilisateur page 51

SECTION 11 UPDATE
● A computer with Windows XP/7/8/10 system is
required.
1. Go to www.topdon.com/products/artilink500b, click
"DOWNLOADS", and select "Update Tool" to download to
your PC.
2. To update the scan tool, please connect the tool to PC
through USB-Mini cable.
3. Open the PC Suit application and log in to the Topdon
account.
● If it is the first time you purchase the Topdon product
and you don't have an account, please register with
your email.
4. The PC suit will recognize the scan tool automatically.
5. Register the tester (If you have registered it, just ignore),
the information of the tester will be shown on the My
Device interface. Confirm the serial number is correct.
6. Select the appropriate firmware version, then click the
update to install the upgrade.
● The tester will be initialized automatically the first time
you use the tester after the upgrade.
SECTION 12
TECHNICAL SPECIFICATION
Display
Operating Voltage
OBDII Cable Length
2.8" Color Display
DC 9V-30V
51.18"
EN | 51