Topdon AL500B Manuel De L'utilisateur page 9

8. Mini-USB Port: This port is for you to connect to the PC to
transfer the diagnostic or battery test report. (See Figure
2.1.3)
● There is no built-in battery inside of the AL500B, so no
need to charge it. The Mini-USB port is only for data
transformation.
9. Diagnostic Cable with DB15 Female Connector & 16-pin
OBD-II Port . (See Figure 2.1.4)
● This connects to the DB15 Male connector at the top of
the ArtiLink 500B. The other end connects to the OBD
port.
10. Battery Test Cable with DB15 Female Connector & Battery
Clamps. (See Figure 2.1.5)
● This can also be connected to the DB15 Male connector
to test the vehicle battery.
Figure 2.1.3
Figure 2.1.4
EN | 9