Topdon AL500B Manuel De L'utilisateur page 13

The SETUP (See Figure 2.2.8) function allows you to change
the settings of the scan tool, e.g., language, unit of measure,
record mode, and beeper.
Figure 2.2.8
The Help (See Figure 2.2.9) function provides you with
important information from the scan tool, e.g., the general
introduction of OBD, live data stream, I/M readiness, and the
notes of the PRINT function.
Figure 2.2.9
The Info (See Figure 2.2.10) provides you with the information
of the AL500B you purchased, including software version,
serial number, register code, etc.
Figure 2.2.10
EN | 13