Topdon AL500B Manuel De L'utilisateur page 19

I/M Readiness
The I/M Readiness (See Figure 3.4.1) checks whether or
not the various emissions-related systems on the vehicle
are operating properly, and are ready for Inspection and
Maintenance testing.
It can also be used to confirm that the repair has been
performed correctly, and/or to check for monitor run status
after the repair has been performed.
● To perform the I/M Readiness function, you can also
press the I/M shortcut button. (See Figure 3.4.2)
Figure 3.4.1
1. Press the [OK] or the I/M shortcut button to perform this
function, the results will be presented on the screen. (See
Figure 3.4.3)
Figure 3.4.2
EN | 19