Topdon AL500B Manuel De L'utilisateur page 33

3. Once the clamps are properly connected, the battery
tester will power on automatically and be ready to conduct
tests.
Battery Test
● The battery testing function is only applicable for 12V
lead-acid batteries (24V are not supported).
1. Select BAT TEST and press OK to enter the battery test
submenu (See Figure 4.2.1).
2. To perform a battery test, select Battery Test and press
[OK] (See Figure 4.2.2).
(Red)
Figure 4.1.6
Figure 4.2.1
EN | 33
(Black)