Daily Use - Franke FSM 97 P Mode D'emploi

DAILY USE

1.
SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require: the display will
light up and an audible signal will sound�
2.
ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require�
Please note: During cooking you can change the function
by turning the selection knob or adjust the temperature by
turning the thermostat knob.
The function will only start if the thermostat knob is on 0 °C.
You can set the cooking time, cooking end time (only if you
set a cooking time) and a timer.
AUTOMATIC
To start the automatic function you have selected
("Bread" or "Dessert"), keep the thermostat knob at the
position for automatic functions (0)�
To finish cooking, turn the selection knob to position 0�
Please note: You can set the cooking end time and timer.
RISING
To start the "Rising" function, turn the thermostat knob
to the relevant symbol; if the oven is set to a different
temperature, the function will not start�
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
3.
PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a
flashing icon on the display indicate that the
preheating phase is active� When the set temperature
has been reached, the icon becomes fixed and a new
audible signal will sound to indicate that the food can
be placed inside and cooking can proceed�
Please note: Placing food in the oven before the preheating
phase has finished may have an adverse effect on the final
result of cooking.
After cooking and with the function deactivated, the
icon may continue to remain visible on the display
even after the cooling fan has switched off to indicate
that there is residual heat in the compartment�
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product
should be considered to be off when the pointer on the
selection knob is at " ".
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking�
DURATION
Keep pressing until the
flashing on the display�
Use or to set the cooking time you require, then
press to confirm�
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete�
Notes: To cancel the cooking time you have set, keep
pressing until the icon starts flashing on the display,
then use to reset the cooking time to "00:00".
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press until the
start flashing on the display�
Use or to set the time you want cooking to end
and press to confirm�
Activate the function by turning the thermostat knob
to the temperature you require: the function will
remain paused until it starts automatically after the
period of time that has been calculated in order for
cooking to finish at the time you have set�
Please note: To cancel the setting, switch the oven off by
turning the selection knob to position " ".
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished�
Turn the selection knob to select a different function
or to position " " to switch the oven off�
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
icon and "00:00" start
icon and the current time
EN
7