Daily Use - Franke Smart FSM 45 MW XS Manuel De L'utilisateur

DAILY USE

. JET START
When the oven is switched off, it is possible to press
to activate cooking with the microwave function
set at full power (900 W) for 30 seconds�
1. SELECT A FUNCTION
When the oven is off, only the time is shown on the
display� Turn the selection knob to select one of the
available functions�
2. SET THE FUNCTION
. MANUAL FUNCTIONS
After having selected the function you require, you
can change its settings�
The display will show the settings that can be
changed in sequence�
MICROWAVE POWER / TEMPERATURE
When the icon flashes on the display, turn the
adjustment knob to adjust the power setting and
then press to confirm and continue to alter the
settings that follow (if possible)�
In the same way the
turn the adjustment knob to adjust the temperature
setting and then press
alter the settings that follow�
Please note: once the function has been activated, the power
can be changed by pressing
power settings menu, then turning the adjustment knob to
change the setting.
DURATION
When the icon flashes on the display, turn the
adjustment knob to set the desired duration�
Once the displayed cooking time corresponds with
what you desire, press
function�
Please note: During cooking, you can adjust the cooking time
by turning the knob; each time you press
time increases by 30 seconds.
8
icon flashes on the display,
to confirm and continue to
two times to access the
to confirm and start the
the cooking
. AUTOMATIC FUNCTIONS / AUTO DEFROST
CATEGORIES
Once you have chosen one of the automatic
functions, you will need to select a category for the
food you are cooking�
When the icon flashes on the display, turn the
adjustment knob to select the digit that corresponds
to the desired category, then press
WEIGHT
To achieve the best results, the automatic functions
require you to enter the weight of the food, selecting
from amongst the default settings: the oven will
calculate the ideal length of time for the function to
run for each category of food�
When the default setting appears on the display and
the icon flashes, turn the adjustment knob to
enter the weight, then press
the function�
3. ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function�
Every time the button is pressed again,
the cooking time will be increased by a further
30 seconds (only for manual functions)�
Please note: You can press
function that is currently active.
. SAFETY LOCK
This function is automatically activated to prevent the
oven from being switched on accidentally�
Open and close the door, then press
function�
to confirm�
to confirm and start
twice at any time to stop the
to start the