Cover Removal; Care And Maintenance - Britax Chaperone Guide D'utilisation

60

Care and Maintenance

Cover Removal

WARNING!
• Do not, except as described in this booklet, attempt to
disassemble any part of the infant carrier or change the way its
harness or the vehicle belts are used.
• Do not take apart the harness. It is unnecessary and dangerous
to do so.
• Never remove the buckle tongues from the harness. They
cannot be reattached after removal.
1 Remove the canopy by
unhooking the canopy stays
from the carrier handle.
4 Loosen the harness by
pressing the harness adjuster
release lever and pulling both
harness straps forward.
2 Unhook the cover attachment
flaps.
3 Remove the Infant carrier from
the base.
5 Unbuckle the harness by
pressing the red release button
on the buckle and pulling the
tongues from the buckle.
7 Pull the harness straps
through the shell, cover, and
head restraint.
9 Pull the infant carrier cover
and foam back so the buckle
slots are visible.
Care and Maintenance 61
6 Unhook the harness straps
from the harness yoke on the
bottom of the infant carrier.
8 Remove the head restraint
cover.
* Be careful not to damage the
EPS foam.