Placing Child In Infant Carrier - Britax Chaperone Guide D'utilisation

54 Securing Your Child

Placing Child in Infant Carrier

1 Loosen the harness by
pressing the harness adjuster
lever while pulling both
harness straps forward.
3 Unbuckle the harness by
pressing the red release
button on the buckle and
pulling the tongues from the
buckle.
2 Press the tab and pull apart
the two halves to release the
chest clip.
4 Move the harness straps to
the sides of the infant carrier.
Slouching
Sitting Up
5 Place the child in the infant
carrier as shown.
7 Buckle the harness by
inserting one buckle tongue
at a time into the harness
buckle.
* Connection is confirmed with an
audible click after inserting each
buckle tongue.
* Always pull on the harness to
ensure the buckle is properly
connected.
Securing Your Child 55
6 Position the harness straps
around the child.
8 Fasten the chest clip by
sliding the two halves of the
chest clip together until a click
is heard.