Installing Your Infant Carrier Without Base; Lap-Shoulder Belt Installation - Britax Chaperone Guide D'utilisation

36

Installing Your Infant Carrier without Base

Installation without Base

Lap-Shoulder Belt Installation

Before You Begin:
Check that your vehicle seat belt
9
is compatible with infant carrier
use. See pages 11 – 15 for more
information.
Check your vehicle owner's
9
manual to determine how to lock
your vehicle belt system.
Secure child in carrier before
9
installing carrier in vehicle.
Place the infant carrier rear-
1
facing on the vehicle seat.
Carrier Installation with Lap
Shoulder Belt
Pull the vehicle belt out and
2
route the lap portion of the
vehicle belt through the first
belt guide.
* Do not route the shoulder
portion of the vehicle belt
through the belt guides.
Installing Your Infant Carrier without Base
3 Route the lap part of the
vehicle belt through the
second belt guide.
* Do not route the shoulder
portion of the vehicle belt
through the belt guides.
6 Push the infant carrier firmly
into the vehicle seat while
removing all slack from the lap
portion and then the shoulder
portion of the vehicle belt.
IMPORTANT: If you cannot lock your vehicle seat belt you must use
a locking clip. See pages 40 – 43. Locking clips are available for
purchase by contacting Britax Consumer Services at 1.888.427.4829.
37
4 Verify that the vehicle belt is
not twisted and then buckle.
5 Lock your vehicle seat belt
system as instructed by your
vehicle owner's manual.
* See pages 11 – 15 for more
information.