Manufacturer's Warranty; Ec Declaration Of Conformity (Original) - Hilti VC 60-U Mode D'emploi

2. Allow the drilling slurry to settle and dispose of the solid material at a construction waste
disposal site (the addition of a flocculent may accelerate the separation process).
3. The remaining water (alkaline, pH value > 7) must be neutralized by the addition of an acidic
neutralizing agent or diluted with a large volume of water before it is allowed to flow into the
sewerage system.

11 Manufacturer's warranty

Hilti warrants that the tool supplied is free of
defects in material and workmanship. This war-
ranty is valid so long as the tool is operated and
handled correctly, cleaned and serviced prop-
erly and in accordance with the Hilti Operating
Instructions, and the technical system is main-
tained. This means that only original Hilti con-
sumables, components and spare parts may
be used in the tool.
This warranty provides the free-of-charge re-
pair or replacement of defective parts only over
the entire lifespan of the tool. Parts requiring
repair or replacement as a result of normal wear
and tear are not covered by this warranty.

12 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this
product complies with the following directives
and standards: 2006/42/EC, 2004/108/EC,
2011/65/EU, EN 60335‑1, EN 60335‑2‑69,
EN ISO 12100.
Printed: 05.01.2017 | Doc-Nr: PUB / 5323628 / 000 / 00
Wet / dry vacuum
cleaner
VC 60‑U
01
2007
Additional claims are excluded, unless strin-
gent national rules prohibit such exclusion.
In particular, Hilti is not obligated for direct,
indirect, incidental or consequential dam-
ages, losses or expenses in connection with,
or by reason of, the use of, or inability to use
the tool for any purpose. Implied warranties
of merchantability or fitness for a particular
purpose are specifically excluded.
For repair or replacement, send the tool or
related parts immediately upon discovery of
the defect to the address of the local Hilti
marketing organization provided.
This constitutes Hilti's entire obligation with
regard to warranty and supersedes all prior
or contemporaneous comments and oral or
written agreements concerning warranties.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Paolo Luccini
Head of BA Quality and Process
Management
Business Area Electric Tools &
Accessories
01/2012
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
en
Johannes Wilfried Huber
Senior Vice President
Business Unit Diamond
01/2012
31