Hilti VC 60-U Mode D'emploi page 25

Masquer les pouces Voir aussi pour VC 60-U:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
l) Check to ensure that the appliance is
switched off before plugging the supply
cord into a power outlet.
5.4 General safety rules
a) Use the right appliance for the job. Do
not use the appliance for purposes for
en
which it was not intended. Use it only as
directed and when in faultless condition.
b) Never leave the appliance unattended.
c) Take the influences of the surrounding
area into account. Do not use the ap-
pliance where there is a risk of fire of
explosion.
d) Protect the appliance from frost.
e) CAUTION - Store appliances in a secure
place when not in use.When not in use, ap-
pliances must be stored in a dry, high place
or locked away out of reach of children.
f) CAUTION - Always unplug the supply
cord from the power outlet when the ap-
pliance is not in use (during breaks), be-
fore cleaning and maintenance and be-
fore changing the filter.
g) Switch the appliance off before trans-
porting it.
h) Check the appliance and its accessories
for any damage. Guards, safety devices
and any slightly damaged parts must be
checked carefully to ensure that they
function faultlessly and as intended.
Check
that
correctly without sticking and that no
parts are damaged. All parts must be
fitted correctly and fulfill all conditions
necessary for correct operation of
the
appliance.
safety devices and other parts must
be repaired or replaced properly at
an authorized service center unless
otherwise indicated in the operating
instructions.
i) Check that the filter is seated correctly.
Check to ensure that the filter is undam-
aged.
j) Have your appliance serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that
the safety of the appliance is maintained.
k) Disconnect the plug from the power
source before making any adjustments,
22
Printed: 05.01.2017 | Doc-Nr: PUB / 5323628 / 000 / 00
moving
parts
function
Damaged
guards,
changing
accessories,
the appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
l) Use the appliance and its accessories
etc. in accordance with these instruc-
tions and in the manner intended for the
particular type of appliance, taking into
account the working conditions and the
work to be performed. Use of appliances
for applications different from those inten-
ded could result in a hazardous situation.
m) The water level limiting device must be
cleaned regularly with a brush in accord-
ance with instructions and checked for
signs of damage.
5.5 Mechanical
a) Follow the instructions concerning care
and maintenance.
b) Keep the appliance well maintained.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect
operation of the appliance. If damaged,
have the appliance repaired before use.
Many accidents are caused by poorly
maintained appliances.
5.6 Electrical
a) The appliance's supply cord plug must
match the outlet. Never modify the plug
in any way. Do not use any adapter plugs
with earthed (grounded) appliances. Un-
modified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces,
radiators,
ranges and
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose appliances to rain or wet
conditions. Water entering an appliance
will increase the risk of electric shock.
d) Check the appliance's supply cord at
regular intervals and have it replaced at
or
storing
such as pipes,
refrigerators.

Publicité

Table des Matières
loading

Table des Matières