Description - Hilti VC 60-U Mode D'emploi

Warning signs
General Warning:
warning caustic
substances
en
Obligation signs
Wear Wear eye
protective protection.
clothing
Wear ear Wear safety
protection. shoes.

2 Description

2.1 Use of the product as directed
The VC 60‑U is a universal industrial vacuum cleaner with an effective filter cleaning system for
dry dust. It is suitable for wet and dry vacuum cleaning applications.
The appliance is suitable for collecting the slurry created by wet drilling or wet cutting operations
on mineral materials using Hilti diamond coring or Hilti diamond sawing equipment and for
collecting large quantities of dry mineral dust when working with Hilti diamond grinders and
cutters, rotary hammers and dry cutting core bits.
The appliance may also be used to pick up liquid waste material.
The appliance is suitable for picking up and collecting dry, non-flammable dusts as well as liquids.
Do not use the appliance to pick up explosive substances or glowing, flammable, burning and
aggressive dusts or liquids (e.g. magnesium or aluminium dust, gasoline, solvents, acids, coolants
and lubricants, etc.).
Do not operate the appliance when laid on its side (always operate in upright position).
The total weight of the appliance including the waste material picked up must not exceed 100 kg.
Do not use the appliance as a substitute for a ladder.
Do not use the appliance for continuous, stationary operation in automatic or semi-automatic
systems.
WARNING - The operating personnel must be instructed on how to use the appliance prior to
beginning work, they must be informed of any hazards associated with the materials to be picked
up and they must be familiar with the correct procedures for safe disposal of these materials.
Underwater use is not permissible.
WARNING - Use of the appliance to pick up substances hazardous to the health, i.e. substances
for which an M‑type or H-type vacuum cleaner is specified, or to pick up oils or liquids with a
temperature above 60°C, is not permissible.
18
Printed: 05.01.2017 | Doc-Nr: PUB / 5323628 / 000 / 00
Warning: Warning:
electricity explosive
substances
Wear Wear a hard
protective hat.
gloves.
Symbols
Read the Return waste
operating material for
instructions recycling.
before use.
Location of identification data on the appli-
ance
The type designation and serial number can be
found on the type identification plate on the
appliance. Make a note of this data in your op-
erating instructions and always refer to it when
making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.: