KTM Power Parts 77212945044 Instructions De Montage page 20

Final steps for Kick-Start Kit Solo only
- Mount the air filter.
- Mount the filter box cover.
- Mount the seat.
Final steps for Kick-Start Kit Kombi and Solo
- Position the water pump cover (1) and mount the screws (2) again (10Nm).
2
2
2
1
2
20
- Fill up with cooling water (Figure A) (see the Owner's Manual).
- Remove the screw (3) and mount the screw again with the washer.
Check that all control elements are functioning properly.
3
Check the oil level.
A