Publicité
Les langues disponibles
Les langues disponibles
5
14
7
9
12
6
8
10
11
13
13
12
11
15
20
ASSEMBLY
Mounting the Kick-Start Kit Kombi and Solo
- Mount the stop plate (1) (included) with the HH collar screws M6x16 (2)
1
2
- Position the Kick-Start idler (3) (included).
- Mount the thrust washer 17x24x0.5 (4) (included) and secure with the
3
4
Premounting the kick starter shaft (all parts included)
6
7
8
9
14
10
11
15
12
17
13
18
14
15
16
16
17
18
Assembly order:
- Mount the stop disk (12) (included), starter wheel (13) (included) and stop
10
- Mount the lock ring (11) (included).
- Mount the kick starter spring (10) (included).
NOTE:
The end of the kick starter spring (10) (included) must engage in the hole
(19).
- Mount the driving hub (9) (included) and stop disk (8) (included).
- Mount the kick starter ratchet wheel (16) (included).
NOTE:
The marking (20) must be aligned with the hole (19).
19
16
(included) (10Nm, Loctite 243).
lock ring DIN0471-17X1 (5) (included).
Distance sleeve 16x23x26x6.1
Shaft seal ring 17x28x7
Stop disk 17.2x24x1
Driving hub
Kick starter spring
Lock ring DIN0471-17X1
Stop disk 17.2x24x1
Starter wheel 28 teeth
Stop disk 17.2x24x1
Kick starter shaft
Kick starter ratchet wheel
Thrust washer DIN0988-16X22X01
Ratchet wheel spring 1.4mm
disk (14) (included) on the kick starter shaft (15) (included).
Publicité
