Yamaha RX10RTL Supplément Au Manuel D'atelier page 36

COOLING SYSTEM
18.Bleed the air from the cooling system.
19.Inspect:
• Cooling system
Decrease of pressure (leaks) → Repair as
required.
Inspection steps:
• Attach the cooling system tester
adapter to the coolant filler
Cooling system tester:
90890-01325, YU-24460-01
Adapter:
90890-01352, YU-33984
• Apply 100 kPa (1.0 kg/cm
• Measure the pressure with the gauge.
Air bleeding
1. Remove:
• Rear cover
2. Bleed air from the cooling system.
8
INSP
ADJ
and
.
2
, 14 psi).