Delivery Checklist; Unpacking The Centrifuge; Transport And Storage; Transport - Hettich ROTOFIX 46 Mode D'emploi

EN
6

Delivery checklist

1 Connecting cable
1 Hexagonal pin-type spanner
1 Lubricating grease for trunnions
1 Operating instructions
1 Notes on moving the equipment safely
The rotor(s) and associated accessories are included in the delivery in the quantity ordered.
7

Unpacking the centrifuge


Lift the carton upward and remove the padding.

Do not lift by the front panel.
Observe the weight of the centrifuge, refer to chapter "Technical specifications".
Lift the centrifuge on both sides with an appropriate number of helpers and place it on the laboratory table.
8

Transport and storage

8.1

Transport

Before transporting the device, the transport securing device must be installed.
When the device and accessories are transported, the following ambient conditions must be complied with:

Ambient temperature: -20°C to +60°C

Relative humidity: 10% to 80%, non-condensing
8.2

Storage

The device and the accessories may only be stored in closed and dry rooms.
When the device and accessories are stored, the following ambient conditions must be complied with:

Ambient temperature: -20°C to +60°C

Relative humidity: 10% to 80%, non-condensing
38/102 Rev. 07 / 05.2020 AB4600DEENFRIT