Calibration Single Sensor - MSA Orion plus Mode D'emploi

• MENU to return to 4 sensor calibration
• NEXT to perform Calibration.
9. Press:
• VALUE to see gas Value instead of gas Flag
• ABORT to cancel Calibration.
10.Press:
• MEASURE to return to Measure mode
• REPEAT to start 4 sensor Calibration again
• MENU to return to 4 sensor calibration.
• If Calibration is successful, the instrument asks for
confirmation.
• If Calibration is not successful, user can:
• REPEAT or
• ABORT.
Figure 5-4. Calibration Page

Calibration Single Sensor

1. Access with OK.
2. Press NEXT and follow a procedure similar to that previously given
under "Calibration Multiple Sensors".
NOTE: After performing FAS, the unit will ask for Span gas; the
calibration value can be adjusted in this mode.
5-6