MSA Orion plus Mode D'emploi page 42

6. Connect the instrument by clicking on the
CONNECT INSTRUMENT button.
• The following Welcome screen appears:
Figure 5-7. Welcome to ORION plus
• The CONNECT INSTRUMENT button can be used to
reestablish an interrupted connection.
• The CREATE PROTOCOL button can be used to store all
the instrument data.
• FIGURE 5-7 displays the:
• instrument data
• information concerning individual sensors.
• After pressing the SETTINGS button, the user can change:
• settings for each sensor individually
(if the required areas are adjustable)
• alarm settings for installed sensors.
5-14