MSA Orion plus Mode D'emploi page 33

Figure 5-3. Gas Mixture Screen
4. Press:
• ABORT to cancel
• MEASURE to return to Measure mode
• REPEAT to start FAS again
• MENU to return to 4 sensor calibration
• NEXT to perform FAS.
5. Press:
• VALUE to see gas Value instead of gas Flag
• ABORT to cancel FAS.
6. Press:
• MEASURE to return to Measure mode
• REPEAT to start FAS again
• MENU to return to 4 sensor calibration.
• If FAS is successful, instrument displays "Apply Span gas".
7 Press:
• ABORT to cancel.
8. Press:
• MEASURE to return to Measure mode
• REPEAT to return to "Apply Span Gas"
5-5