Setting The Priority Channel; Setting Channel Delay - Albrecht AE125H Mode D'emploi

Setting the Priority Channel

The Priority feature lets you designate one stored channel in each bank
as a Priority channel. When the Priority feature is turned on, the scanner
checks that bank's priority channel for activity every 2 seconds as it
scans the bank. This feature lets you scan through the channels and still
not miss important or interesting calls on specific channels.
identify a Priority channel.
1. To select a channel, press Hold then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to Set Priority and press Pgm/E.
4. Scroll to Priority On and press Pgm/E to save and return to
the Channel Menu.

Setting Channel Delay

This setting controls how many seconds the scanner waits after a
transmission ends before resuming scanning. If you select a minus delay
time, the scanner stops on the transmission for the setting time, then
automatically resumes scanning. (Default = 2 seconds)
1. To select a channel, press Hold then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to Set Delay and press Pgm/E.
4. Turn SCROLL CONTROL to select the delay time from the
following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
92 English
displays to
P