Using The Keypad Lock; Setting The Beep Tone; Resetting The Scanner; Pc Programming - Albrecht AE125H Mode D'emploi

2300mAh
4. Press .Clr to exit.

Using the Keypad Lock

Use the scanner's keypad lock to protect it from accidental program
changes. When the keypad is locked, only Func, Hold,
and SCROLL CONTROL(volume only) operate.
Press Func then L/O to toggle the keypad lock on and off. The scanner
displays Keypad Lock On or Keypad Lock Off.

Setting the Beep Tone

Press Func then Beep/7(Default = ON) to toggle the keypress
confirmation tone on or off.

Resetting the Scanner

WARNING: Resetting the scanner clears all data and settings you
have entered. You cannot restore user programmed data that has
been deleted. You can, at a last step, restore only the original
factory data.
1. Press and hold the 2, 9 and Hold keys and turn on the
scanner.
2. The scanner clears all data and returns to the initial setting
except the band plan. All Memory Clear displays.

PC Programming

Connect your scanner to your PC through the USB cable to:
•
Program channels into the scanner
•
Set any setting
When you connect your scanner to your PC, a series of screens will
appear to assist you.
USB drivers and optional programming software are available for
download from http://www.service.alan-electronics.de.
88
14 hours
English
, , ,