signal level required to open squelch. To listen to a weak or
distant station, decrease the Squelch setting.
4.
Press SCROLL CONTROL to set the desired level and return
to the previous mode.
Setting the Backlight
Press
to turn on the backlight on and off.
1.
Press Func and
2.
From this menu, scroll to Set Backlight from the submenus.
Press SCROLL CONTROL.
3.
Scroll to select one of the following settings:
•
•
•
•
•
•
4.
Press Pgm/E (or press SCROLL CONTROL) to save and
return to the previous menu. (Default = Always Off )
5.
Press .Clr to exit.
Notes: While being in the menu the backlight can be switched between
"Always On" and "Always Off" by pressing
the
button.
Adjusting the Contrast
This submenu of the Display/Charge menu controls the display's
contrast (how light or dark it appears) for different viewing conditions.
86
to view the Display/Charge menu.
Always Off - Backlight is always off.
Always On – Backlight is always on.
On with Squelch - Backlight is on while squelch is
open and until delay expires.
On with Keypress - Backlight is on for 10 seconds
after any key is pressed.
Keypress + Squelch – Both above-mentioned
"Squelch" and "Keypress."
< Back - Return to previous menu.
English