Keypad Lock; Memory Channel(S) - Albrecht DB 275 Dualband Mode D'emploi

1.12 Keypad Lock

When Keypad lock is used, other buttons can not be used except the buttons [MENU], [PTT] or
[CALL].
To lock the keypad, press [MENU] more than one second until the display shows
To unlock the keypad again, [MENU] again more than 1 second until

1.13 Memory Channel(s)

You can store Frequencies found under VFO mode into Memory Channels.
 Under VFO Mode, Select the desired frequency, then press [#/MR] more than 1 second,
 "εEεηRY" appears and the next line shows the next free channel number (in that case "ί1").
 Press [UP]/[DOWN],you can select other channel numbers (01-09), or type in two digits as the
desired channel number.
 Press [MENU] to store the channel and exit. Cancel procedure and exit without storing:: press
*/BAND]
 Function cannot be used under channel mode – you can store channels only under VFO mode
(or via PC software programming).
disappears again.